Harrington-signal IS815 Instrukcja Użytkownika Pobierz pdf

Harrington Signal Inc., 2519 4th Avenue, Moline, Illinois 61265, USA

Tel: 800 577 5758 Fax: 309 762 8215

Website: www.harringtonﬁ re.com

I-Spy Mini Switch Monitor Module and

I-Spy Mini Priority Switch Monitor Module

Installation Instructions

General

The I-Spy Mini Switch Monitor Module, part no IS816, is a loop-powered device, which

incorporates a monitored input circuit for connection to switches. The module is supplied as

a small plastic housing designed to fit into an electrical box. Six flying leads of 18AWG are

used to connect the module.

A red LED flashes in synchronization with the current pulse reply from the device. If output

bit 2 is set the LED is illuminated continuously.

The I-Spy Mini Priority Switch Monitor Module, part no IS815, has, in additon, a priority

interrupt facility to give fast response and can be fitted in an electrical box behind a pull

station.

Note: the I-Spy Mini Switch Monitor Module and the Mini Priority Switch Monitor Module are

not designed for outdoor use unless they are mounted in a suitable weatherproof enclosure.

Installation

1. The I-Spy Mini Switch Monitor Module and the I-Spy Mini Priority Switch Monitor Module

are not physically attached to the electrical box other than by means of the flying leads.

2. Connect the modules for Class A wiring or Class B wiring (Fig 2). Bit 8 of the DIL

switch is used to select the class of wiring. All wiring must conform to local codes and

regulations.

39214-239/Issue 2

Functional Test Data

OUTPUT BIT FUNCTION INPUT BIT FUNCTION

2 ALARM LED 2 ALARM LED CONFIRMATION

1 = ON 1 = ON

0 = OFF 0 = OFF

1 REMOTE TEST 1 INDICATES WIRING CLASS

1 = TEST ENABLED 1 = CLASS B*

0 = NORMAL 0 = CLASS A

0 NOT USED 0 ALARM STATUS

1 = ALARM

0 = NORMAL

* Note: Toggles to ‘0’ in alarm.

Technical Data

Monitored circuit

Current consumption

Quiescent 600µA

Alarm (LED on) 4.6mA

End-of-line supervisory resistance 47kΩ, 0.5W

Analog levels

Open-circuit fault 4

Normal 16

Alarm on switch closure 64

Compatibility Information

The I-Spy Mini Switch Monitor and I-Spy Mini Priority Switch Monitor modules have been

approved by Underwriters Laboratories Inc. for use with the Fire Spy

™ Tracker 8000 control

panel.

1 2

Podsumowanie treści

Strona 1 - Installation Instructions

Strona 2 - Fig 3. DIL Switch

23Address SettingSegments 1–7 of the DIL switch are used to select the address of the module. Each of the seven segments must be set to ‘0’ (ON) or ‘1

Komentarze do niniejszej Instrukcji

Brak uwag

Harrington-signal IS815 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Czujniki Harrington-signal IS815. Harrington Signal IS815 User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji